Great product, quality service.
Wade Fencing
£54.16 (ex VAT)
Pickup available at Tipton West Midlands
Usually ready in 4 hours
Become a trade card holder and get a discount on this item
Solid galvanised steel site hoarding panels for creating a private, enclosed perimeter around construction sites, compounds, welfare areas, equipment storage and public-facing works.
Both panel heights are 2140mm wide and manufactured from galvanised steel.
A solid barrier rather than open mesh, helping screen the site from public view.
Available in 2m and 2.4m heights to suit the required hoarding arrangement.
Each panel provides 2.14m of nominal run width before allowing for the connection system.
Panels can be installed with rubber blocks and couplers, with gates and additional stabilisation available for suitable site layouts.
Solid hoarding is particularly useful where an open temporary fence does not provide enough privacy or visual screening.
These panels are installed using rubber blocks and couplers. The existing product guidance recommends doubled-up galvanised fence clips to help prevent panels being lifted from their blocks.
Solid hoarding presents more surface area to wind than open mesh fencing, so exposed installations need appropriate bracing and stabilisation. Where required, ballast blocks and ballast block stabilisers can form part of the installation.
For access through the hoarding line, pair the panels with the appropriate pedestrian gate or vehicle gate.
| Product type | Solid site hoarding panel |
| Material | Galvanised steel |
| Panel width | 2140mm |
| Available heights | 2m and 2.4m |
| Panel weight | 29kg |
| Manufacture | British made |
| Installation | Rubber blocks and couplers |
For a complete solid hoarding installation, combine the panels with rubber blocks and galvanised fence clips. Add ballast blocks and stabilisers where the site requires additional support, and use matching pedestrian or vehicle gates for controlled access.
Solid site hoarding panels are used to create enclosed temporary boundaries around construction sites, compounds, welfare areas, equipment storage and public-facing works where privacy and visual screening are important.
Each panel is 2140mm wide and is available in 2m and 2.4m heights. The panel weight is 29kg.
Based on the 2140mm panel width, the existing product guidance specifies 46 panels for a 100m run, together with 47 feet and 94 couplers.
Yes. Matching pedestrian and vehicle gates are available for access through the hoarding line.
Solid panels have more surface area exposed to wind than open mesh fencing. Site conditions, exposure and the overall installation should therefore be considered carefully, with appropriate bracing or ballast used where required.
Speak to Wade about panel heights, quantities, gates, ballast and the components needed for your hoarding run.
Contact Wade →More great deals at Wade
Your basket is currently empty.
Start Shopping