Naylor ER2 Economy 100 x 140mm Concrete Lintel by Naylor Naylor ER2 Economy 100 x 140mm Concrete Lintel by Naylor
High-Density Concrete Padstone 300 x 215 x 102mm | Pre-Stressed Wet Cast Concrete Padstone | Structural Load Bearing Support Block Conforming to BS 8110 by Naylor High-Density Concrete Padstone 300 x 215 x 102mm | Pre-Stressed Wet Cast Concrete Padstone | Structural Load Bearing Support Block Conforming to BS 8110 by Naylor
Naylor ER2 Economy 100 x 140mm Concrete Lintel by Naylor Naylor ER2 Economy 100 x 140mm Concrete Lintel by Naylor
Naylor ER2 Economy 100 x 140mm Concrete Lintel by Naylor Naylor ER2 Economy 100 x 140mm Concrete Lintel by Naylor
High-Density Concrete Padstone 300 x 215 x 102mm | Pre-Stressed Wet Cast Concrete Padstone | Structural Load Bearing Support Block Conforming to BS 8110 by Naylor High-Density Concrete Padstone 300 x 215 x 102mm | Pre-Stressed Wet Cast Concrete Padstone | Structural Load Bearing Support Block Conforming to BS 8110 by Naylor
Concrete Lintel 100 x 140mm | Naylor ER2 Economy by Naylor Concrete Lintel 100 x 140mm | Naylor ER2 Economy by Naylor
Concrete Lintel 100 x 140mm | Naylor ER2 Economy by Naylor Concrete Lintel 100 x 140mm | Naylor ER2 Economy by Naylor
Naylor ER2 Economy 100 x 140mm Concrete Lintel by Naylor
High-Density Concrete Padstone 300 x 215 x 102mm | Pre-Stressed Wet Cast Concrete Padstone | Structural Load Bearing Support Block Conforming to BS 8110 by Naylor
Naylor ER2 Economy 100 x 140mm Concrete Lintel by Naylor
Naylor ER2 Economy 100 x 140mm Concrete Lintel by Naylor
High-Density Concrete Padstone 300 x 215 x 102mm | Pre-Stressed Wet Cast Concrete Padstone | Structural Load Bearing Support Block Conforming to BS 8110 by Naylor
Concrete Lintel 100 x 140mm | Naylor ER2 Economy by Naylor
Concrete Lintel 100 x 140mm | Naylor ER2 Economy by Naylor
Lintel Type : Concrete Lintels

Naylor

Concrete Lintel 100 x 140mm ER2 Economy

£17.00

£14.16 (ex VAT)

Length

Pickup available at Tipton West Midlands

Usually ready in 4 hours

Become a trade card holder and get a discount on this item

Create an account or Log in

Request a Bulk Quote

The Naylor ER2 Economy concrete lintel has a 100 × 140mm section and is designed for suitable masonry openings, particularly in plastered situations. It is fully reversible and has a textured, extruded concrete finish. Naylor specifies 30 minutes of fire resistance and identifies the Economy range as suitable for foundation use. Choose a lintel length to suit the opening, required end bearings and loading conditions, using the manufacturer's technical information.

100 × 140mmLintel section
600–3000mmLength options in this listing
30 minutesDeclared fire resistance

Key features

Naylor ER2 Economy range

A practical concrete lintel for standard masonry openings where the selected length meets the design requirements.

100 × 140mm section

A 100mm-wide by 140mm-deep profile for compatible masonry construction.

Fully reversible

The ER2 can be installed in either orientation, following Naylor's installation guidance for the application.

30-minute fire resistance

Naylor's Economy range provides 30 minutes of fire resistance as standard.

Textured concrete finish

The extruded finish is normally intended for plastered situations. For exposed decorative finishes, check the appropriate product range.

Foundation applications

Naylor identifies the Economy range as suitable for foundation use, subject to the installation detail and project specification.

Where is the Naylor ER2 used?

The ER2 is intended for suitable openings in walls and partitions where the span, masonry arrangement and imposed loads fall within its declared performance. Its textured concrete finish is normally covered by plaster or render.

Naylor also lists the Economy range as suitable for foundation use. Confirm that the proposed below-ground detail, support conditions, bearings and loads follow the manufacturer's instructions and project design before specifying the lintel.

Product specifications

Naylor ER2 Economy 100 × 140mm concrete lintel
Manufacturer Naylor
Product range Economy concrete lintel
Lintel code ER2
Section 100 × 140mm
Lengths listed by Wade 600mm, 750mm, 900mm, 1050mm, 1200mm, 1350mm, 1500mm, 1800mm, 1950mm, 2100mm, 2400mm, 2700mm and 3000mm
Weight Approximately 34kg per metre
Material Concrete
Finish Textured / extruded concrete; normally plastered
Orientation Fully reversible
Declared fire resistance 30 minutes
Foundation use Listed as suitable by Naylor, subject to the application detail
Relevant standard BS EN 845-2, as stated in Naylor's product documentation

ER2 declared load-bearing capacity

The following figures are from Naylor's published Economy lintel data for the 100 × 140mm ER2 section. They are unfactored loads in kN/m paired with the corresponding clear spans. Use them with the manufacturer's installation guidance and project design; they are not a substitute for structural assessment.

Naylor ER2 length, clear span and unfactored load
Lintel length Clear span Unfactored load Fire resistance
900mm 700mm 35.30kN/m 30 minutes
1200mm 1000mm 20.83kN/m 30 minutes
1500mm 1200mm 14.69kN/m 30 minutes
1800mm 1500mm 9.49kN/m 30 minutes
2100mm 1800mm 6.59kN/m 30 minutes
2400mm 2100mm 4.81kN/m 30 minutes
2700mm 2400mm 3.63kN/m 30 minutes
3000mm 2700mm 2.82kN/m 30 minutes

Compare Economy concrete lintels

Compare other Naylor Economy sections if the opening dimensions or structural requirements call for a different profile.

Technical downloads

Frequently asked questions

What size is the Naylor ER2?

The ER2 has a 100 × 140mm section.

Is the ER2 reversible?

Yes. Naylor describes its Economy lintels as fully reversible. Follow the manufacturer's installation instructions for the intended application.

What lengths can I select?

This Wade listing includes lengths from 600mm to 3000mm. Naylor's published load table provides values for standard lengths from 900mm to 3000mm.

What fire resistance does the ER2 provide?

Naylor's Economy range offers 30 minutes of fire resistance as standard.
Estimate shipping
Length

Featured Collection

More great deals at Wade

Shop Acrow Props Builders Shoring Props
Propmate Brick Wall Support - Strongboy Prophead Alternative by Wade Fencing
Quick view
Wade Fencing
Propmate Brick Wall Support - Strongboy Prophead Alternative £29.00 £24.17 (ex VAT)
5.0
In stock
Acrow Props Size 0 by Wade Fencing Acrow Props Size 0 by Wade Fencing
Quick view
Wade Fencing
Acrow Props Size 0 £22.00 £18.33 (ex VAT)
4.9
In stock
Acrow Prop Size 1 by Wade Fencing Acrow Prop Size 1 by Wade Fencing
Quick view
Wade Fencing
Acrow Prop Size 1 £30.00 £25.00 (ex VAT)
4.9
In stock
Acrow Props Size 2 by Wade Fencing Acrow Props Size 2 by Wade Fencing
Quick view
Wade Fencing
Acrow Props Size 2 £34.00 £28.33 (ex VAT)
4.8
In stock
Naylor ER2 Economy 100 x 140mm Concrete Lintel by Naylor

Request a Quote

Get a personalised quote for your bulk order for Concrete Lintel 100 x 140mm ER2 Economy. Fill out the form below and we'll get back to you within 24 hours.