Naylor Hi Spec 100 x 140mm Concrete Lintel R6 by Naylor Naylor Hi Spec 100 x 140mm Concrete Lintel R6 by Naylor
Naylor Hi Spec 100 x 140mm Concrete Lintel R6 by Naylor Naylor Hi Spec 100 x 140mm Concrete Lintel R6 by Naylor
Naylor Hi Spec 100 x 140mm Concrete Lintel R6 by Naylor
Naylor Hi Spec 100 x 140mm Concrete Lintel R6 by Naylor
Lintel Type : Concrete Lintels

Naylor

Concrete Lintel Hi Spec 100 x 140mm R6

£74.00

£61.66 (ex VAT)

Length

Pickup available at Tipton West Midlands

Usually ready in 4 hours

Become a trade card holder and get a discount on this item

Create an account or Log in

Request a Bulk Quote

The Naylor R6 Hi-Spec concrete lintel has a 100 × 140mm section and is designed for suitable masonry openings in 100mm-wide walls and partitions. Made from prestressed concrete with a textured finish, it is normally used in plastered or rendered situations and provides 30 minutes of declared fire resistance. Select the length to suit the clear span, required end bearings and design loads, using Naylor's current technical information.

100 × 140mmLintel section
600–3600mmLength options in this listing
30 minutesDeclared fire resistance

Key features

Naylor R6 Hi-Spec

A prestressed concrete lintel for suitable masonry openings where the selected length meets the structural requirements.

100 × 140mm section

A 100mm-wide by 140mm-deep profile for compatible wall construction.

30-minute fire resistance

Naylor's Declaration of Performance lists 30 minutes of fire resistance for the R6 lintel.

Textured concrete finish

The Hi-Spec extruded finish is normally intended for plastered or rendered applications rather than exposed decorative use.

Marked for orientation

Check the TOP marking and follow the manufacturer's installation guidance when positioning the lintel.

Foundation applications

Naylor identifies the R6 as suitable for foundation use, subject to the installation details and project specification.

Where is the Naylor R6 used?

The R6 is intended for suitable openings in 100mm-wide walls and partitions where the required load capacity falls within Naylor's declared performance. The textured Hi-Spec finish is normally covered by plaster or render.

Naylor also identifies the Hi-Spec R6 as suitable for foundation use. Confirm that the proposed below-ground detail, exposure conditions, bearings and loads follow the manufacturer's guidance and the project design.

Product specifications

Naylor R6 Hi-Spec 100 × 140mm concrete lintel
Manufacturer Naylor
Product range Hi-Spec concrete lintel
Lintel code R6
Section 100 × 140mm
Lengths listed in Shopify 600mm, 900mm, 1200mm, 1350mm, 1500mm, 1800mm, 2100mm, 2400mm, 2700mm, 3000mm, 3300mm and 3600mm
Mass Approximately 34kg per metre
Material Prestressed concrete
Finish Textured / extruded concrete; normally plastered or rendered
Declared fire resistance 30 minutes
Intended use Concrete lintel for walls and partitions
Relevant standard BS EN 845-2:2013+A1:2016, as stated in Naylor's Declaration of Performance

R6 declared load-bearing capacity

The figures below are taken from Naylor's published R6 Declaration of Performance. They are declared load-bearing capacities in kN/m paired with the corresponding clear spans. Use them with the manufacturer's installation guidance and project design; they are not a substitute for structural assessment.

Naylor R6 length, clear span and declared load-bearing capacity
Lintel length Clear span Declared capacity Fire resistance
900mm 700mm 38.73kN/m 30 minutes
1200mm 1000mm 30.87kN/m 30 minutes
1500mm 1200mm 27.22kN/m 30 minutes
1800mm 1500mm 19.32kN/m 30 minutes
2100mm 1800mm 13.59kN/m 30 minutes
2400mm 2100mm 10.04kN/m 30 minutes
2700mm 2400mm 7.70kN/m 30 minutes
3000mm 2700mm 6.06kN/m 30 minutes
3300mm 3000mm 4.88kN/m 30 minutes
3600mm 3200mm 4.27kN/m 30 minutes

Compare Naylor Hi-Spec lintels

Compare section depth and declared capacity, then check the technical data for the opening and loading conditions.

Technical downloads

Frequently asked questions

What size is the Naylor R6 lintel?

The R6 has a 100 × 140mm section.

What lengths are available on Wade's listing?

The current listing includes 600mm, 900mm, 1200mm, 1350mm, 1500mm, 1800mm, 2100mm, 2400mm, 2700mm, 3000mm, 3300mm and 3600mm options.

What fire resistance does the R6 provide?

Naylor's Declaration of Performance lists 30 minutes of fire resistance for the R6 lintel.

Can the R6 be used below ground?

Naylor identifies the R6 as suitable for foundation use. Confirm that the proposed installation follows the manufacturer's guidance and project specification.
Estimate shipping
Length

Featured Collection

More great deals at Wade

Shop Acrow Props Builders Shoring Props
Propmate Brick Wall Support - Strongboy Prophead Alternative by Wade Fencing
Quick view
Wade Fencing
Propmate Brick Wall Support - Strongboy Prophead Alternative £29.00 £24.17 (ex VAT)
5.0
In stock
Acrow Props Size 0 by Wade Fencing Acrow Props Size 0 by Wade Fencing
Quick view
Wade Fencing
Acrow Props Size 0 £22.00 £18.33 (ex VAT)
4.9
In stock
Acrow Prop Size 1 by Wade Fencing Acrow Prop Size 1 by Wade Fencing
Quick view
Wade Fencing
Acrow Prop Size 1 £30.00 £25.00 (ex VAT)
4.9
In stock
Acrow Props Size 2 by Wade Fencing Acrow Props Size 2 by Wade Fencing
Quick view
Wade Fencing
Acrow Props Size 2 £34.00 £28.33 (ex VAT)
4.8
In stock
Naylor Hi Spec 100 x 140mm Concrete Lintel R6 by Naylor

Request a Quote

Get a personalised quote for your bulk order for Concrete Lintel Hi Spec 100 x 140mm R6. Fill out the form below and we'll get back to you within 24 hours.