Naylor ER1 Economy 100 x 65mm Concrete Lintel by Naylor Naylor ER1 Economy 100 x 65mm Concrete Lintel by Naylor
Concrete Padstones 100x65 | Pre-Stressed | Naylor ER1 by Naylor Concrete Padstones 100x65 | Pre-Stressed | Naylor ER1 by Naylor
Naylor ER1 Economy 100 x 65mm Concrete Lintel by Naylor Naylor ER1 Economy 100 x 65mm Concrete Lintel by Naylor
Naylor ER1 Economy 100 x 65mm Concrete Lintel by Naylor Naylor ER1 Economy 100 x 65mm Concrete Lintel by Naylor
Concrete Lintel 140 x 65mm | Naylor ER3 Economy by Naylor Concrete Lintel 140 x 65mm | Naylor ER3 Economy by Naylor
Concrete Lintel 100 x 65mm | Naylor ER1 Economy by Naylor Concrete Lintel 100 x 65mm | Naylor ER1 Economy by Naylor
Concrete Lintel 100 x 65mm | Naylor ER1 Economy by Naylor Concrete Lintel 100 x 65mm | Naylor ER1 Economy by Naylor
Concrete Padstones 100x65 | Pre-Stressed | Naylor ER1 by Naylor Concrete Padstones 100x65 | Pre-Stressed | Naylor ER1 by Naylor
Concrete Padstones 100x65 | Pre-Stressed | Naylor ER1 by Naylor Concrete Padstones 100x65 | Pre-Stressed | Naylor ER1 by Naylor
Concrete Padstones 100x65 | Pre-Stressed | Naylor ER1 by Naylor Concrete Padstones 100x65 | Pre-Stressed | Naylor ER1 by Naylor
Naylor ER1 Economy 100 x 65mm Concrete Lintel by Naylor
Concrete Padstones 100x65 | Pre-Stressed | Naylor ER1 by Naylor
Naylor ER1 Economy 100 x 65mm Concrete Lintel by Naylor
Naylor ER1 Economy 100 x 65mm Concrete Lintel by Naylor
Concrete Lintel 140 x 65mm | Naylor ER3 Economy by Naylor
Concrete Lintel 100 x 65mm | Naylor ER1 Economy by Naylor
Concrete Lintel 100 x 65mm | Naylor ER1 Economy by Naylor
Concrete Padstones 100x65 | Pre-Stressed | Naylor ER1 by Naylor
Concrete Padstones 100x65 | Pre-Stressed | Naylor ER1 by Naylor
Concrete Padstones 100x65 | Pre-Stressed | Naylor ER1 by Naylor
Lintel Type : Concrete Lintels

Naylor

Concrete Lintel 100 x 65mm ER1 Economy

£8.50

£7.08 (ex VAT)

Length

Pickup available at Tipton West Midlands

Usually ready in 4 hours

Become a trade card holder and get a discount on this item

Create an account or Log in

Request a Bulk Quote

The Naylor ER1 Economy concrete lintel has a 100 × 65mm section and is designed for suitable masonry openings, particularly in plastered situations. The unit is fully reversible and has a textured, extruded concrete finish. Naylor declares 30 minutes of fire resistance and identifies the ER1 as suitable for foundation use. Select the length to suit the opening, required end bearings and loading conditions, checking the manufacturer's technical information before specifying.

100 × 65mmLintel section
450–2400mmLength options in this listing
30 minutesDeclared fire resistance

Key features

Naylor ER1 Economy range

A practical concrete lintel for suitable small or standard masonry openings where the declared capacity meets the design requirements.

100 × 65mm section

A compact lintel profile for compatible wall and partition construction.

Fully reversible

The ER1 can be installed in either orientation, following Naylor's installation instructions for the application.

30-minute fire resistance

Naylor's Declaration of Performance states 30 minutes of fire resistance.

Textured concrete finish

The extruded finish is normally intended for plastered situations. For exposed decorative finishes, check the appropriate product range.

Foundation applications

Naylor identifies the ER1 as suitable for foundation use, subject to the project detail and manufacturer's guidance.

Where is the Naylor ER1 used?

The ER1 is intended for suitable openings in walls and partitions. Naylor's product information identifies typical uses including small service openings and below-ground foundation applications. It is most suited to situations where the opening, masonry and imposed loads fall within the lintel's declared performance.

For lintel use, confirm the clear span, required end bearings, masonry arrangement and loads above the opening. For foundation use, check that the installation detail follows Naylor's guidance and the project specification.

Product specifications

Naylor ER1 Economy 100 × 65mm concrete lintel
Manufacturer Naylor
Product range Economy concrete lintel
Lintel code ER1
Section 100 × 65mm
Lengths listed by Wade 450mm, 600mm, 750mm, 900mm, 1050mm, 1200mm, 1350mm, 1500mm, 1800mm, 2100mm and 2400mm
Weight Approximately 16kg per metre
Material Concrete
Finish Textured / extruded concrete; normally plastered
Orientation Reversible, as specified in the product information
Declared fire resistance 30 minutes
Foundation use Listed as suitable by Naylor, subject to the application detail
Relevant standard BS EN 845-2:2013+A1:2016, as stated in Naylor's Declaration of Performance

ER1 declared load-bearing capacity

The following values are from Naylor's published Declaration of Performance for the ER1. They are declared load-bearing capacities in kN/m for the listed lintel lengths. Check the associated clear span and installation requirements before using these figures for selection.

Naylor ER1 length, clear span and declared load-bearing capacity
Lintel length Clear span Declared capacity Fire resistance
900mm 700mm 9.27kN/m 30 minutes
1200mm 1000mm 5.00kN/m 30 minutes
1500mm 1200mm 3.46kN/m 30 minutes
1800mm 1500mm 2.18kN/m 30 minutes
2100mm 1800mm 1.48kN/m 30 minutes
2400mm 2100mm 1.05kN/m 30 minutes

Compare concrete lintels

Compare other Naylor concrete lintel sections if your opening or loading requirements call for a different profile.

Technical downloads

Frequently asked questions

What size is the Naylor ER1?

The ER1 has a 100 × 65mm section.

Is the ER1 reversible?

Yes. The product information describes the ER1 as fully reversible. Follow the manufacturer's instructions for the intended application.

What lengths can I select?

This Wade listing includes lengths from 450mm to 2400mm. Naylor's published declared load table provides figures for 900mm, 1200mm, 1500mm, 1800mm, 2100mm and 2400mm.

What fire resistance does the ER1 provide?

Naylor's Declaration of Performance states 30 minutes of fire resistance.
Estimate shipping
Length

Customer Reviews

Overall rating: 4.8 / 5 from 5 reviews.

First class service and first class product.

Carol B. 5/5 Verified

Naylor Lintel ER1 - 100 x 65mm

Store owner replied: Hi Carol, Thank you for leaving us a Five Star Review on our Website for your Naylor Concrete Lintel. It helps our Community and is appreciated. I am pleased you are happy with your Naylor Lintel ER1 and our Service. We hope you revisit us, and please do not hesitate to contact me if we can help with anything else. Kind regards Neil Thompson Sales & Operations Manager Wade Building Supplies

Featured Collection

More great deals at Wade

Shop Acrow Props Builders Shoring Props
Propmate Brick Wall Support - Strongboy Prophead Alternative by Wade Fencing
Quick view
Wade Fencing
Propmate Brick Wall Support - Strongboy Prophead Alternative £29.00 £24.17 (ex VAT)
5.0
In stock
Acrow Props Size 0 by Wade Fencing Acrow Props Size 0 by Wade Fencing
Quick view
Wade Fencing
Acrow Props Size 0 £22.00 £18.33 (ex VAT)
4.9
In stock
Acrow Prop Size 1 by Wade Fencing Acrow Prop Size 1 by Wade Fencing
Quick view
Wade Fencing
Acrow Prop Size 1 £30.00 £25.00 (ex VAT)
4.9
In stock
Acrow Props Size 2 by Wade Fencing Acrow Props Size 2 by Wade Fencing
Quick view
Wade Fencing
Acrow Props Size 2 £34.00 £28.33 (ex VAT)
4.8
In stock
Naylor ER1 Economy 100 x 65mm Concrete Lintel by Naylor

Request a Quote

Get a personalised quote for your bulk order for Concrete Lintel 100 x 65mm ER1 Economy. Fill out the form below and we'll get back to you within 24 hours.