ARC

ARC Cavity Stop Sock 125mm

£8.50

£7.08 (ex VAT)

Pickup available at Tipton West Midlands

Usually ready in 4 hours

Become a trade card holder and get a discount on this item

Create an account or Log in

Request a Bulk Quote

The ARC Cavity Stop Sock 125mm (CSS125) is a passive fire protection cavity barrier designed to restrict the spread of fire within external masonry wall cavities. This version is specified for external cavities up to 125mm wide and is supplied in 1.2m lengths.

Key Features

For cavities up to 125mm

Designed for external masonry cavities with a maximum width of 125mm.

Rockfibre mineral wool

Made using rockfibre mineral wool with an A1 fire classification stated in ARC's product information.

Compression fit

The product information specifies a 10mm compression requirement and installation as brickwork or blockwork progresses.

Horizontal or vertical use

ARC states that the product can be installed horizontally or vertically at the relevant party wall detail.

Product Specifications

ARC Cavity Stop Sock 125mm — product details
Manufacturer ARC Building Solutions
Product code CSS125
Maximum external cavity width 125mm
Dimensions listed 135 × 120 × 1200mm
Length supplied 1.2m
Compression requirement 10mm, as stated in ARC product information
Insulation material Rockfibre mineral wool
Thermal conductivity 0.037 W/mK
Fire integrity 4 hours masonry fire integrity, as stated in ARC's data sheet*
Insulation performance 15 minutes, as stated in ARC's data sheet*
Fire classification Euroclass A1, as stated in ARC product information
Certification ARC product information references IFC certificates IFCC 1727 and IFCC 1728
Wade selling unit Sold individually

*Fire performance applies to the relevant tested construction and installation. Check the latest ARC technical documentation and certificate scope for the project-specific application.

Typical Applications

The ARC Cavity Stop Sock is designed for use within external masonry wall cavities. ARC identifies applications including cavity barriers around openings, at separating wall or floor junctions, and at eaves level, subject to the relevant construction detail and certification.

Installation and Technical Information

ARC's product information describes the Cavity Stop Sock as a compression-fit product installed as brickwork or blockwork progresses, with no mechanical fixing required for the stated application. Correct fit and continuity are important; installation must follow the manufacturer's instructions and the relevant tested construction.

Manufacturer Information

Frequently Asked Questions

What cavity width is the CSS125 designed for?

It is designed for a maximum external cavity width of 125mm. Check the actual cavity and required compression fit before ordering.

What fire performance does it have?

ARC's product datasheet states 4 hours masonry fire integrity and 15 minutes insulation performance for CSS125. Confirm the relevant certified construction before specification.

Does the Cavity Stop Sock need mechanical fixing?

ARC's product information describes a compression-fit installation and states that mechanical fixing is not required for the specified application. Follow the current installation instructions.

Should the polythene sleeve be removed?

ARC states that the sleeve should remain in place during installation. It provides product identification and protection from the elements; it does not add to the product's stated performance.

Need Help Selecting a Cavity Stop Sock?

Contact Wade Building Supplies if you need help checking cavity sizing or selecting the right product for your wall construction.

Contact Wade Building Supplies
Estimate shipping
ARC Cavity Stop Sock 125mm by ARC

Request a Quote

Get a personalised quote for your bulk order for ARC Cavity Stop Sock 125mm. Fill out the form below and we'll get back to you within 24 hours.