Naylor Hi Spec 100 x 215mm Concrete Lintel R9 by Naylor Naylor Hi Spec 100 x 215mm Concrete Lintel R9 by Naylor
Naylor Hi Spec 100 x 215mm Concrete Lintel R9 by Naylor
Lintel Type : Concrete Lintels

Naylor

Concrete Lintel Hi Spec 100 x 215mm R9

£80.00

£66.66 (ex VAT)

Length

Pickup available at Tipton West Midlands

Usually ready in 4 hours

Become a trade card holder and get a discount on this item

Create an account or Log in

Request a Bulk Quote

The Naylor R9 Hi-Spec concrete lintel has a 100 × 215mm section and is designed for suitable masonry openings in walls and partitions. Made from prestressed concrete with a textured finish, it is normally used in plastered or rendered situations. Naylor's declared performance includes load-bearing capacity and 30 minutes of fire resistance. Select the lintel length to suit the clear span, required end bearings and loads, using the manufacturer's technical data.

100 × 215mm Lintel section
900–3600mm Lengths in Naylor's published load table
30 minutes Declared fire resistance

Key features

Naylor R9 Hi-Spec

A prestressed concrete lintel for masonry openings where the selected length and its declared capacity meet the structural requirements.

100 × 215mm section

A 100mm-wide by 215mm-deep lintel section for suitable wall and partition construction.

Textured concrete finish

The Hi-Spec finish is normally intended for plastered or rendered applications rather than exposed painted finishes.

30-minute fire resistance

Naylor's Declaration of Performance lists 30 minutes of fire resistance for the R9 lintel.

Below-ground applications

Naylor's lintel selector identifies the R9 range as suitable for foundation use when correctly specified.

Marked for orientation

Check the TOP marking and follow the manufacturer's installation guidance when positioning the lintel.

Where is the Naylor R9 used?

The R9 is intended for suitable masonry openings in walls and partitions, including residential, commercial and other construction projects where the required load capacity falls within Naylor's declared performance. Its Hi-Spec finish is intended for plastered or rendered situations.

Naylor also identifies the R9 as suitable for foundation use. For any below-ground installation, confirm that the actual detail, exposure conditions, bearings and loads follow the manufacturer's guidance and the project design.

Product specifications

Naylor R9 Hi-Spec 100 × 215mm concrete lintel
Manufacturer Naylor
Product range Hi-Spec lintel
Lintel code R9
Section 100 × 215mm
Lengths listed in Shopify 600mm, 900mm, 1200mm, 1350mm, 1500mm, 1800mm, 2100mm, 2400mm, 2700mm, 3000mm, 3300mm and 3600mm
Mass Approximately 53kg per metre
Material Prestressed concrete
Finish Hi-Spec textured / extruded concrete; normally plastered or rendered
Declared fire resistance 30 minutes
Intended use Concrete lintel for walls and partitions
Harmonised standard BS EN 845-2:2013+A1:2016, as stated in Naylor's Declaration of Performance

R9 declared load-bearing capacity

The following values are from Naylor's published Declaration of Performance for the R9 lintel. They are manufacturer-declared load-bearing capacities in kN/m and must be applied in line with Naylor's span, bearing and installation guidance.

Naylor R9 lintel length and declared load-bearing capacity
Lintel length Declared capacity
900mm 96.25kN/m
1200mm 62.92kN/m
1500mm 50.00kN/m
1800mm 37.15kN/m
2100mm 28.63kN/m
2400mm 22.61kN/m
2700mm 18.13kN/m
3000mm 14.48kN/m
3300mm 11.68kN/m
3600mm 9.78kN/m

Compare Naylor concrete lintels

Compare section sizes and ranges, then check the technical data for the required opening and loading conditions.

100 × 290mm section

Naylor Hi-Spec Lintel Range

View Naylor’s Hi-Spec range information and compare the available section sizes against the project design.

Technical downloads

Frequently asked questions

What size is the Naylor R9 lintel?

The R9 has a 100 × 215mm section.

What finish does the R9 have?

The Hi-Spec finish is a textured concrete finish normally intended for plastered or rendered situations, not exposed painted applications.

What fire resistance does it provide?

Naylor's Declaration of Performance lists 30 minutes of fire resistance for the R9 lintel.

Can the R9 be used below ground?

Naylor's lintel selector identifies the R9 as suitable for foundation use. Confirm that the particular below-ground detail follows the manufacturer's guidance and project specification.
Estimate shipping
Length

Featured Collection

More great deals at Wade

Shop Acrow Props Builders Shoring Props
Propmate Brick Wall Support - Strongboy Prophead Alternative by Wade Fencing
Quick view
Wade Fencing
Propmate Brick Wall Support - Strongboy Prophead Alternative £29.00 £24.17 (ex VAT)
5.0
In stock
Acrow Props Size 0 by Wade Fencing Acrow Props Size 0 by Wade Fencing
Quick view
Wade Fencing
Acrow Props Size 0 £22.00 £18.33 (ex VAT)
4.9
In stock
Acrow Prop Size 1 by Wade Fencing Acrow Prop Size 1 by Wade Fencing
Quick view
Wade Fencing
Acrow Prop Size 1 £30.00 £25.00 (ex VAT)
4.9
In stock
Acrow Props Size 2 by Wade Fencing Acrow Props Size 2 by Wade Fencing
Quick view
Wade Fencing
Acrow Props Size 2 £34.00 £28.33 (ex VAT)
4.8
In stock
Naylor Hi Spec 100 x 215mm Concrete Lintel R9 by Naylor

Request a Quote

Get a personalised quote for your bulk order for Concrete Lintel Hi Spec 100 x 215mm R9. Fill out the form below and we'll get back to you within 24 hours.