Naylor Economy 140 x 140mm Concrete Lintel ER6 by Naylor Naylor Economy 140 x 140mm Concrete Lintel ER6 by Naylor
Naylor Economy 140 x 140mm Concrete Lintel ER6 by Naylor Naylor Economy 140 x 140mm Concrete Lintel ER6 by Naylor
Naylor Economy 140 x 140mm Concrete Lintel ER6 by Naylor Naylor Economy 140 x 140mm Concrete Lintel ER6 by Naylor
Naylor Economy 140 x 140mm Concrete Lintel ER6 by Naylor
Naylor Economy 140 x 140mm Concrete Lintel ER6 by Naylor
Naylor Economy 140 x 140mm Concrete Lintel ER6 by Naylor
Lintel Type : Concrete Lintels

Naylor

Concrete Lintel 140 x 140mm ER6 Economy

£42.00

£35.00 (ex VAT)

Length

Pickup available at Tipton West Midlands

Usually ready in 4 hours

Become a trade card holder and get a discount on this item

Create an account or Log in

Request a Bulk Quote

The Naylor ER6 Economy concrete lintel has a 140 × 140mm section and is designed for suitable masonry openings in standard housing and other small-load situations. It is fully reversible, with an extruded concrete finish normally intended for plastered applications. Naylor declares 30 minutes of fire resistance and identifies the Economy range as suitable for foundation use. Select the length to suit the opening, required end bearings and loading conditions, and check the manufacturer's technical information before specifying.

140 × 140mmLintel section
600–3000mmLength options in this listing
30 minutesDeclared fire resistance

Key features

Naylor ER6 Economy range

A cost-effective concrete lintel for suitable standard housing and small-load applications where the declared capacity meets the design.

140 × 140mm section

A square concrete lintel section for compatible masonry construction.

Fully reversible

The Economy range is reversible. Follow Naylor's installation instructions for the intended application.

30-minute fire resistance

Naylor's ER6 Declaration of Performance lists 30 minutes of fire resistance.

Extruded concrete finish

The finish is normally intended for plastered situations rather than exposed decorative applications.

Foundation applications

Naylor identifies the Economy range as suitable for foundation use, subject to the installation details and project specification.

Where is the Naylor ER6 used?

The ER6 is intended for suitable openings in walls and partitions where the span, masonry arrangement and imposed loads fall within its declared performance. Naylor positions the Economy range for standard housing or small-load situations, with a finish normally covered by plaster.

The manufacturer also lists the ER6 as suitable for foundation use. Confirm that the proposed below-ground detail, support conditions, bearings and loads follow Naylor's guidance and the project design before specifying the lintel.

Product specifications

Naylor ER6 Economy 140 × 140mm concrete lintel
Manufacturer Naylor
Product range Economy concrete lintel
Lintel code ER6
Section 140 × 140mm
Lengths listed by Wade 600mm, 750mm, 900mm, 1050mm, 1200mm, 1350mm, 1500mm, 1650mm, 1800mm, 1950mm, 2100mm, 2250mm, 2400mm, 2550mm, 2700mm, 2850mm and 3000mm
Weight Approximately 47kg per metre
Material Concrete
Finish Extruded concrete; normally plastered
Orientation Fully reversible
Thermal conductivity 1.52 W/m·K
Declared fire resistance 30 minutes
Foundation use Listed as suitable by Naylor, subject to the application detail
Relevant standard BS EN 845-2:2013+A1:2016, as stated in Naylor's Declaration of Performance

ER6 declared load-bearing capacity

The figures below are from Naylor's published ER6 Declaration of Performance. They are declared load-bearing capacities in kN/m matched to the clear spans shown by Naylor. Use them with the manufacturer's installation guidance and the project design; they are not a substitute for structural assessment.

Naylor ER6 length, clear span and declared load-bearing capacity
Lintel length Clear span Declared capacity Fire resistance
900mm 700mm 27.18kN/m 30 minutes
1200mm 1000mm 15.95kN/m 30 minutes
1500mm 1200mm 11.19kN/m 30 minutes
1800mm 1500mm 7.16kN/m 30 minutes
2100mm 1800mm 4.91kN/m 30 minutes
2400mm 2100mm 3.52kN/m 30 minutes
2700mm 2400mm 2.61kN/m 30 minutes
3000mm 2700mm 1.98kN/m 30 minutes

Compare Economy concrete lintels

Compare other Naylor Economy sections if your opening dimensions or loading requirements call for a different profile.

Technical downloads

Frequently asked questions

What size is the Naylor ER6?

The ER6 has a 140 × 140mm section.

Is the ER6 reversible?

Yes. Naylor describes its Economy lintels as fully reversible. Follow the manufacturer's installation guidance for the intended application.

What lengths can I choose?

This Wade listing offers 17 options from 600mm to 3000mm. Naylor's published load table provides values for standard lengths from 900mm to 3000mm in 300mm increments.

What fire resistance does the ER6 provide?

Naylor's ER6 Declaration of Performance states 30 minutes of fire resistance.
Estimate shipping
Length

Featured Collection

More great deals at Wade

Shop Acrow Props Builders Shoring Props
Propmate Brick Wall Support - Strongboy Prophead Alternative by Wade Fencing
Quick view
Wade Fencing
Propmate Brick Wall Support - Strongboy Prophead Alternative £29.00 £24.17 (ex VAT)
5.0
In stock
Acrow Props Size 0 by Wade Fencing Acrow Props Size 0 by Wade Fencing
Quick view
Wade Fencing
Acrow Props Size 0 £22.00 £18.33 (ex VAT)
4.9
In stock
Acrow Prop Size 1 by Wade Fencing Acrow Prop Size 1 by Wade Fencing
Quick view
Wade Fencing
Acrow Prop Size 1 £30.00 £25.00 (ex VAT)
4.9
In stock
Acrow Props Size 2 by Wade Fencing Acrow Props Size 2 by Wade Fencing
Quick view
Wade Fencing
Acrow Props Size 2 £34.00 £28.33 (ex VAT)
4.8
In stock
Naylor Economy 140 x 140mm Concrete Lintel ER6 by Naylor

Request a Quote

Get a personalised quote for your bulk order for Concrete Lintel 140 x 140mm ER6 Economy. Fill out the form below and we'll get back to you within 24 hours.